AURC270103A
Apply Safe Work Practices
20.00 hr
This unit incorporates the Worksafe Australia Guidelines and encompasses competencies necessary to apply basic safety and emergency procedures to maintain a safe workplace for staff, customers and others.
AURE218676A
Test, Service And Charge Batteries
15.00 hr
This unit covers the competence to service, remove, replace and charge automotive batteries. The unit includes identification and confirmation of work requirement, preparation for work, servicing, testing and charging of batteries, jump-starting of vehicle/equipment and completion of work finalisation processes, including cleanup and documentation.
AURE218708A
Carry Out Repairs To Single Electrical Circuits
40.00 hr
This unit covers the competence to test electrical circuits and carry out repairs in an automotive retail, service and/or repair context, including replacement of fuses, bulbs and terminals, wiring repairs, i.e. open circuits/short circuits/earthing. The unit includes identification and confirmation of work requirement, preparation for work, testing of circuits and identification of faults/causes, repair and replacement of circuit components and completion of work finalisation processes, including cleanup and documentation.
AURE320666A
Repair Ignition Systems
30.00 hr
This unit covers the competence to repair Kettering and electronic ignition systems (not including systems associated with electronic engine management) and magnetos and associated components for light vehicles, plant, motorcycles, marine and outdoor power equipment. The unit includes identification and confirmation of work requirement, preparation for work, testing of systems and identification of faults/causes, repair and testing of ignition systems and completion of work finalisation processes, including clean-up and documentation. For ignitions systems associated with electronic engine management see AURE321171A Service and repair electronic spark ignition engine management systems.
AURE321171A
Service And Repair Spark Ignition Engine Management Systems
60.00 hr
This unit covers the competence to service/repair electronic spark ignition engine management systems and associated components. Engine management systems are systems where the ECU incorporates control over both fuel injection and ignition systems. The unit includes identification and confirmation of work requirement, preparation for work, testing and diagnosis of faults, servicing, repair and retesting of systems and completion of work finalisation processes, including clean-up and documentation.
AURE321271A
Service And Repair Electronic Drive Management Systems
50.00 hr
This unit covers the competence to service/repair electronic drive management systems and/or associated components. The unit includes identification and confirmation of work requirement, preparation for work, testing and diagnosis of faults, servicing, repair and retesting of systems and completion of work finalisation processes, including clean-up and documentation.
AURE321371A
Service And Repair Electronic Body Management Systems
40.00 hr
This unit covers the competence to service/repair electronic body management systems and/or associated components which include engine immobilisation, central locking, power windows, electric mirrors, electronic seat adjustment with memory and security systems. The unit includes identification and confirmation of work requirement, preparation for work, testing and diagnosis of faults, servicing, repair and retesting of systems and completion of work finalisation processes, including clean-up and documentation.
AURT200108A
Carry Out Service Operations
20.00 hr
This unit covers the competence required to carry out routine and scheduled servicing operations It requires identification of servicing requirements, preparation for work, correct handling of lubricants and fluids, completion of servicing and work finalisation processes, including documentation.
AURT201170A
Inspect And Service Engines
20.00 hr
This unit covers the competence required to carry out the inspection and service of two and four stroke spark ignition and two and four stroke compression ignition engines. The unit includes identification and confirmation of work requirement, preparation for work, inspection and servicing of engines and completion of work finalisation processes, including clean-up and documentation For service of outdoor power equipment engines and associated components see AURP01570A Service engines and associated engine components (outdoor power equipment).
AURT202166A
Repair Cooling Systems
20.00 hr
This unit covers the competence required to carry out fault diagnosis and repair of air and liquid cooling systems. The unit includes identification and confirmation of work requirement, preparation for work, testing and analysis of systems, repair of cooling systems and completion of work finalisation processes, including clean-up and documentation.
AURT202170A
Inspect And Service Cooling Systems
10.00 hr
This unit covers the competence required to carry out the inspection and service of air and liquid cooling systems in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection, analysis and servicing of cooling systems and completion of work finalisation processes, including clean-up and documentation.
AURT203170A
Service Petrol Fuel Systems
15.00 hr
This unit covers the competence required to carry out servicing on mechanical and electric/electronic petrol fuel system/ components in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, servicing of petrol fuel system components and completion of work finalisation processes, including clean-up and documentation. The competence does not include electronic fuel injection or electronic engine management systems.
AURT206670A
Inspect And Service Transmissions (Manual)
10.00 hr
This unit covers the competence required to inspect and service manual transmissions in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection, analysis and servicing of manual transmissions and completion of work finalisation processes, including clean-up and documentation.
AURT207170A
Inspect & Service Transmissions (Automatic)
10.00 hr
This unit covers the competence required to carry out the inspection and service of semi-automatic, automatic transmissions and associated components, including torque converters in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection, analysis, servicing and testing of automatic transmissions and completion of work finalisation processes, including clean-up and documentation.
AURT210170A
Inspect And Service Braking Systems
20.00 hr
This unit covers the competence required to inspect and service of braking systems and/or associated components, including pneumatic over hydraulic, air, hand and parking brake systems in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, conduct of brake system wear analysis, servicing of braking systems and completion of work finalisation processes, including clean-up and documentation.
AURT212670A
Service Final Drive Assemblies
5.00 hr
This unit covers the competence required to carry out testing and servicing of final drive assemblies and associated components in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, testing and analysis of results, servicing of final drive assemblies and completion of work finalisation processes, including clean-up and documentation.
AURT213170A
Service Final Drive (Driveline)
5.00 hr
This unit covers the competence required to carry out the servicing of final drive drivelines in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection of drivelines, the analysis of inspections results, servicing of drivelines and completion of work finalisation processes, including clean-up and documentation.
AURT215170A
Inspect And Service Steering Systems
10.00 hr
This unit covers the competence required carry out the inspection and servicing of wheeled and tracked type steering systems and associated components in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection and servicing of wheeled and tracked type steering systems and associated components and completion of work finalisation processes, including clean-up and documentation. For bicycle steering service refer to unit AURB215671A Service and repair bicycle steering systems For marine steering service and repair refer to unit AURR346266A Diagnose and repair rope, cable and chain systems.
AURT216170A
Inspect And Service Suspension Systems
10.00 hr
This unit covers the competence required to carry out the service of suspension systems and associated components in an automotive retail, service and/or repair context. The unit includes identification and confirmation of work requirement, preparation for work, inspection, analysis and servicing of suspension systems and completion of work finalisation processes, including clean-up and documentation.
AURT217766A
Remove, Inspect, Repair And Fit Tyres And Tubes (Light)
40.00 hr
This unit covers the competence required to remove, inspect, repair and fit tubes and tyres. The unit includes identification and confirmation of work requirement, preparation for work, removal, repair and fitting of tyres and tubes and completion of work finalisation processes, including clean-up and documentation.
AURT270278A
Use And Maintain Workplace Tools And Equipment
20.00 hr
This unit covers the competence required to select, safely use and maintain workplace tooling and equipment. The unit includes identification and confirmation of work requirement, preparation for work, selection, use, servicing, maintenance and storage of tooling and equipment and completion of work finalisation processes, including clean-up and documentation.
AURT271781A
Implement And Monitor Environmental Regulations In The Automotive Mechanical Industry
20.00 hr
This unit covers the competence to undertake service or repair of light or heavy vehicles, motorcycles, outdoor power equipment or their components in a manner that ensures the protection of the environment.
AURT301166A
Repair Engines And Associated Engine Components
40.00 hr
This unit covers the competence required to carry out repair of an engine, and associated engine components on two and four stroke spark ignition and two and four stroke compression ignition engines. The unit includes identification and confirmation of work requirement, preparation for work, engine system testing and analysis, repair of engines and associated components and completion of work finalisation processes, including clean-up and documentation. For service and repair of outdoor power equipment engines and associated components see AURP201570A Service engines and associated engine components (outdoor power equipment).
AURT303166A
Repair Petrol Fuel Systems
40.00 hr
This unit covers the competence required to carry out repairs to mechanical and electric/electronic carburettor petrol fuel systems/components. The unit includes identification and confirmation of work requirement, preparation for work, testing of systems and analysis of test results, repair of petrol fuel system components and completion of work finalisation processes, including clean-up and documentation. The competence does not include electronic fuel injection or electronic engine management systems see AURE321171A Service and repair electronic spark ignition engine management systems.
AURT304666A
Repair And Replace Emission Control Systems
20.00 hr
This unit covers the competence required to carry out repairs to emission control systems. The unit includes identification and confirmation of work requirement, preparation for work, repair of emission control systems and associated components and completion of work finalisation processes, including clean-up and documentation.
AURT306170A
Inspect, Service And/Or Repair Clutch Assemblies And Associated Operating System Components
30.00 hr
This unit covers the competence required to carry out the service and/or repair of clutch assemblies and associated components. The unit includes identification and confirmation of work requirement, preparation for work, testing of clutch assemblies, analysis of results, repairs or service to clutch assemblies and completion of work finalisation processes, including clean-up and documentation.
AURT306666A
Repair Transmissions (Manual)
40.00 hr
This unit covers the competence required to carry out removal, repair and replacement of manual transmissions. The unit includes identification and confirmation of work requirement, preparation for work, testing and analysis of systems, removal, repair and replacement of manual transmissions and completion of work finalisation processes, including clean-up and documentation.
AURT307166A
Repair Transmissons (Automatic)
50.00 hr
This unit covers the competence required to carry out the repair of, automatic and semi-automatic transmissions and associated components, including torque converters. The unit includes identification and confirmation of work requirement, preparation for work, testing and analysis of systems, repair or replacement of and automatic and semiautomatic transmissions and completion of work finalisation processes, including clean-up and documentation. For repairs to electronic control drive management systems refer to AURE321271A Service and repair electronic drive management systems.
AURT310166A
Repair Hydraulic Braking Systems
40.00 hr
This unit covers the competence required to carry out repairs to hydraulic braking systems and/or associated components, including air over hydraulic systems and hand or parking brake systems. The unit includes identification and confirmation of work requirement, preparation for work, testing of braking systems and analysis of results, repairing of hydraulic braking systems and associated components and completion of work finalisation processes, including clean-up and documentation. This unit does not cover ABS control, see unit AURE321471A Service and repair electronically controlled anti-lock braking systems.
AURT312666A
Repair Final Drive Assemblies
20.00 hr
This unit covers the competence required to carry out repairs to final drive assemblies. The unit includes identification and confirmation of work requirement, preparation for work, testing, analysis of results and carrying out repairs to final drive assemblies and associated components and completion of work finalisation processes, including clean-up and documentation.
AURT313166A
Repair Final Drive (Drivelines)
20.00 hr
This unit covers the competence required to carry out repairs to drive and tail shafts. The unit includes identification and confirmation of work requirement, preparation for work, testing and analysis of results, completion of repairs to final drive and completion of work finalisation processes, including clean-up and documentation.
AURT315166A
Repair Steering Systems
30.00 hr
This unit covers the competence required to carry out repairs to wheeled and/or tracked type steering systems and associated components except for: Bicycles steering repair refer to AURB215671A Service and repair bicycle steering systems Marine steering services and repair refer to AURR346266A Diagnose and repair rope, chain and cable systems. The unit includes identification and confirmation of work requirement, preparation for work, tests and analysis of results, completion of repairs and completion of work finalisation processes, including clean-up and documentation.
AURT316166A
Repair Suspension Systems
30.00 hr
This unit covers the competence required to carry out the repairs to suspension systems and associated components, including chain drive systems. The unit includes identification and confirmation of work requirement, preparation for work, inspections/testing and analysis of outcomes and completion of repair actions and work finalisation processes, including clean-up and documentation.
AURE319166A
Repair Charging Systems
This unit covers the competence to test and repair charging systems appropriate to vehicles, plant and equipment, motorcycles and/or outdoor power equipment and/or marine vessels. The unit includes identification and confirmation of work requirement, preparation for work, testing of systems and identification of faults/causes, repair and retesting of charging systems and completion of work finalisation processes, including clean-up and documentation.
AURE319266A
Repair Starting Systems
This unit covers the competence to test and repair starting systems appropriate to vehicles, plant and equipment, motorcycles and/or outdoor power equipment and/or marine vessels. The unit includes identification and confirmation of work requirement, preparation for work, testing of systems and identification of faults/causes, repair and retesting of starting systems and completion of work finalisation processes, including clean-up and documentation.
AURT366108A
Carry Out Diagnostic Procedures
20.00 hr
This unit covers the competence required to diagnose component/equipment faults from different symptoms and to nominate repair action.
AURT466208A
Carry Out Diagnosis Of Complex System Faults
80.00 hr
This unit covers the competence required to diagnose faults in systems integrating two or more automotive systems or incorporating three or more of mechanical, hydraulic, pneumatic, electrical or electronic media. The unit includes identification and confirmation of the work requirement, preparation for work, diagnosis and identification of the cause(s) of faults, establishment of the repair requirements and completion of work finalisation processes, including clean-up and documentation.